Cisco UCS C460 Installation And Service Guide

iii
Cisco UCS C460 Server Installation and Service Guide
OL-22326-01
CONTENTS
Preface vii
Related Documentation vii
Audience vii
Organization vii
Conventions viii
Obtaining Documentation and Submitting a Service Request xiii
CHAPTER 1 Overview 1-1
CHAPTER 2 Installing the Server 2-1
Unpacking and Inspecting the Server 2-2
Preparing for Server Installation 2-3
Installation Guidelines 2-3
Rack Requirements 2-4
Equipment Requirements 2-4
Slide Rail Adjustment Range 2-4
Installing the Server In a Rack 2-5
Initial Server Setup 2-8
Connecting and Powering On the Server (Standalone Mode) 2-8
NIC Modes and NIC Redundancy Settings 2-11
Using the 10 Gb Ports 2-12
System BIOS and CIMC Firmware 2-13
Updating the BIOS and CIMC Firmware 2-13
Accessing the System BIOS 2-14
Motherboard Jumpers for Clearing BIOS Settings 2-14
Using a BIOS Recovery Jumper on Header J6D1 2-15
Using a Clear BIOS Admin Password Jumper on Header J5C3 2-16
Using a Clear CMOS Jumper on Header J5C2 2-17
CHAPTER 3 Maintaining the Server 3-1
Server Monitoring and Management Tools 3-1
Cisco Integrated Management Interface (CIMC) 3-1
Server Configuration Utility 3-1

Cisco UCS C460 Specifications

General

Brand	Cisco
Model	UCS C460
Category	Server
Language	English