vii
Catalyst 2950 Desktop Switch Hardware Installation Guide
78-11157-03
Contents
Installing the GBIC Modules 2-20
Powering On the Switch 2-22
Connecting to DC Power 2-23
Preparing for Installation 2-23
Grounding the Switch 2-24
Wiring the DC-Input Power Source 2-26
Running POST 2-32
Connecting to 10/100 and 10/100/1000 Ports 2-33
Connecting to 100BASE-FX and 1000BASE-SX Ports 2-37
Connecting to GBIC Module Ports 2-38
Connecting to 1000BASE-X GBIC Module Ports 2-39
Connecting to 1000BASE-T GBIC Module Ports 2-41
Connecting to GigaStack GBIC Module Ports 2-42
Connecting a PC or a Terminal to the Console Port 2-43
Where to Go Next 2-45
CHAPTER
3 Troubleshooting 3-1
Understanding POST Results 3-2
Diagnosing Problems 3-2
APPENDIX
A Technical Specifications A-1
APPENDIX
B Connectors and Cables B-1
Connector Specifications B-1
10/100 Ports B-1
10/100/1000 Ports B-3
Connecting to 10BASE-T and 100BASE-TX Devices B-3
Connecting to 1000BASE-T Devices B-3
100BASE-FX and 1000BASE-SX Ports B-4
To Next Page
Loading...
Need help?
General