Send document comments to ucs-docfeedback@cisco.com
A-1
Cisco UCS 6100 Series Fabric Interconnect Hardware Installation Guide
OL-20036-02
APPENDIX
A
Technical Specifications
This appendix includes the following sections:
• System Specifications, page A-1
• Power Specifications, page A-2
• Transceiver Specifications, page A-3
Note Specifications for cables and connectors are provided in Appendix B, “Cable and Port Specifications.”
System Specifications
Table A-1 lists the specifications for the fabric interconnects.
Ta b l e A-1 Physical Specification
Description Specification
Physical (Cisco UCS 6120XP)
Dimensions (H x W x D) 1.72 in. (4.4 cm) x 17.3 in. (43.9 cm) x 30.0 in. (76.2 cm)
Weight (with two power supplies and one
expansion module installed)
35 lb (15.875 kg)
Physical (Cisco UCS 6140XP)
Dimensions (H x W x D) 3.47 in. (8.8 cm) x 17.3 in. (43.9 cm) x 30.0 in. (76.2 cm)
Weight (with two power supplies and two
expansion modules installed)
50 lb (22.680 kg)
Environmental
Temperature, operating 32 to 104°F (0 to 40°C)
Temperature, nonoperating -40 to 158°F (-40 to 70°C)
Humidity (RH), noncondensing 5 to 95%
Altitude 0 to 10000 ft (0 to 3000 m)
To Next Page
Loading...
Need help?
General