Cisco WS-X6148-GE-TX - Switch User Manual

Send document comments to ucs-docfeedback@cisco.com
B-8
Cisco UCS 6100 Series Fabric Interconnect Hardware Installation Guide
OL-20036-02
Appendix B Cable and Port Specifications
Jumper Power Cord
Figure B-12 CAB-N5K6A-NA
Jumper Power Cord
Figure B-13 shows the plug connector on the optional jumper power cord for the Cisco UCS 6100 Series
Fabric Interconnects. The plug plugs in to the Cisco UCS 6100 Series Fabric Interconnects power supply,
while the connector plugs into the receptacle of a power distribution unit for a cabinet.
Figure B-13 CAB-C13-C14-JMPR, Jumper Power Cord
Cordset rating: 10 A, 250 V
Length: 8.2 ft
186570
Plug: NEMA 6-15P
Connector:
EL 701
(IEC60320/C13)
Cordset rating 10A, 250V
(686mm)
Plug:
SS10A
186569
Connector:
HS10S

Cisco WS-X6148-GE-TX - Switch Specifications

General

Brand	Cisco
Model	WS-X6148-GE-TX - Switch
Category	Switch
Language	English