— 5 —
2.3 Print Paper Specifications
2.3.1 Recommended Paper
(1) Thermal Paper roll
• Type: Heat sensitive paper
• Paper width: 80 + 0/– 1 mm; 58 + 0/– 1 mm
• Paper thickness: 65 ± 5 µm
• Roll diameter:
φ
83 mm or less
• Print side: Outer side of the roll (Top surface)
• Recommended paper: P220VBB-1/HP220A/F230AA (From Mitsubishi Paper)
TF50KS-E2D (From Nippon Paper)
KP50 (From Oji Paper)
or equivalent types of paper
• Core size:
φ
12 mm (Inside diameter);
φ
18 mm (Outside diameter)
(2) Thermal Lavel paper roll
• Type: Heat sensitive paper (Label paper)
• Paper width: 80 + 0/– 1 mm; 58 + 0/– 1 mm
• Label Paper thickness: 65 – 85 µm
• Postebord thickness: 60 µm or less
• Roll diameter:
φ
83 mm or less
• Print side: Outside of the roll (Top surface)
• Recommended paper: KPT86S/G63BC P22 (OHJI TUCK), 135LAB (RICOH)
or equivalent type of label paper
• Core size:
φ
25 –
φ
28 mm (Outside diameter)
CAUTION:
• Use of paper other than the specified papers may cause a difference in print density
from the CBM specifications. In that case, you can select an appropriate print
density with a DIP switch. (See “5. SETTING DIP SWITCHES”)
• Do not stick the end of paper to the core with adhesive paste.
• Avoid allowing the surface of paper to contact with chemicals or oils; otherwise, it
may get colored or the printed data on it may become erased.
• Avoid scraping on the surface of paper with your nail or a metal object; otherwise,
the surface of heat-sensitive paper may get colored.
• Heat-sensitive paper starts getting colored at approx. 70°C; so, be careful not to
expose the paper to the effects from heat, humidity, or sunlight.
To Next Page
Loading...
Need help?
General
