Citizen CL-E321 Programming Manual

CITIZEN Android Label Print SDK — Programming Manual
43
2.2.26 MediaHandling property
Syntax
int MediaHandling
Attribute
Read/Write
Description
Sets the way how to handle media after printing.
Value
Description
CLS_MEDIAHANDLING_NONE (0)
To print without any special actions.
CLS_MEDIAHANDLING_TEAROFF (1)
To feed labels to the tear bar.
CLS_MEDIAHANDLING_DISPENSES (2)
To feed labels to the tear bar, and wait for removal.
CLS_MEDIAHANDLING_PAUSE (3)
To pause after printing.
CLS_MEDIAHANDLING_CUT (4)
To cut after printing.
CLS_MEDIAHANDLING_CUTANDPAUSE (5)
To cut and pause after printing.
CLS_MEDIAHANDLING_PEELOFF (6)
To peel labels off the backing and wait for removal.
CLS_MEDIAHANDLING_REWIND (7)
To use a rewinder.
Setter method
int setMediaHandling (int mediaHandling)
Returns CLS_SUCCESS (0) on success. See "2.1 Return value" for the error codes.
Getter method
int getMediaHandling ()
Returns the set value. If nothing has been set, it returns CLS_PROPERTY_DEFAULT(999999).
Example
int mediaHandling;
printer.setMediaHandling(LabelConst.CLS_MEDIAHANDLING_PAUSE);
mediaHandling = printer.getMediaHandling();

Citizen CL-E321 Specifications

General

Print Technology	Thermal Transfer / Direct Thermal
Resolution	203 dpi
Power Supply	100-240V AC, 50/60 Hz
Max Print Width	4.1 inches (104 mm)
Media Sensor	Transmissive and reflective sensor
Interface	USB, Serial (RS-232)
Media Width	1.97 to 4.33 inches (50 to 110 mm)
Supported Barcode Types	Code 39, Code 128, ITF, Codabar, UPC-A, UPC-E, EAN-8, EAN-13, POSTNET
Supported Media Types	Continuous, Die-cut
Media Thickness	0.0635 – 0.254 mm (2.5 - 10 mil)
Print Speed	Up to 8 inches per second