EasyManuals Logo

Citizen CL-E321 Programming Manual

Citizen CL-E321
95 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
CITIZEN Android Label Print SDK Programming Manual
48
2.2.31 SensorLocation property
Syntax
int SensorLocation
Attribute
Read/Write
Description
Selects the sensor to use for the models which have multiple paper sensors, front and rear.
The choice will be stored in the non-volatile flash memory and will be kept until overwritten.
Value
Description
CLS_SENS_LOCATION_FRONT (0)
Front sensor
CLS_SENS_LOCATION_ADJUSTABLE (1)
Rear sensor
Setter method
int setSensorLocation (int sensorLocation)
Returns CLS_SUCCESS (0) on success. See "2.1 Return value" for the error codes.
Getter method
int getSensorLocation ()
Returns the set value. If nothing has been set, it returns CLS_PROPERTY_DEFAULT(999999).
Example
int location;
printer.setSensorLocation(LabelConst.CLS_SENS_LOCATION_ADJUSTABLE);
location = printer.getSensorLocation();

Table of Contents

Other manuals for Citizen CL-E321

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Citizen CL-E321 and is the answer not in the manual?

Citizen CL-E321 Specifications

General IconGeneral
Print TechnologyThermal Transfer / Direct Thermal
Resolution203 dpi
Power Supply100-240V AC, 50/60 Hz
Max Print Width4.1 inches (104 mm)
Media SensorTransmissive and reflective sensor
InterfaceUSB, Serial (RS-232)
Media Width1.97 to 4.33 inches (50 to 110 mm)
Supported Barcode TypesCode 39, Code 128, ITF, Codabar, UPC-A, UPC-E, EAN-8, EAN-13, POSTNET
Supported Media TypesContinuous, Die-cut
Media Thickness0.0635 – 0.254 mm (2.5 - 10 mil)
Print SpeedUp to 8 inches per second

Related product manuals