Citizen CL-E321 Programming Manual

CITIZEN Android Label Print SDK — Programming Manual
6
1. Introduction
This document is a programming manual for the CITIZEN Android Label Print SDK.
1.1. Who should read this document
This document is intended for developers who integrate their Android application programs with Citizen
label printers.
1.2. System summary
This SDK is referred by Android application program to control Citizen Label printers.
System diagram of the SDK
Supported terminals
Below is a list of supported terminals for the SDK.
Android OS version:
Supported interfaces:
Android 2.3.3 (API Level 10) or newer
Wi-Fi, Bluetooth
Android 3.1 (API Level 12) or newer
Wi-Fi, Bluetooth, USB Host
Supported printer models
Object Model
Interface
Print Method
CL-S700/703
Wired/Wireless LAN, USB
Direct thermal/Thermal transfer
CL-S700II/703II
Wired/Wireless LAN, USB
Direct thermal/Thermal transfer
CL-E720/730
Wired/Wireless LAN, USB, Bluetooth
Direct thermal/Thermal transfer
CL-S621/631
Wired/Wireless LAN, USB
Direct thermal/Thermal tranfer
CL-S621II/631II
Wired/Wireless LAN, USB
Direct thermal/Thermal tranfer
CL-S521/531
Wired/Wireless LAN, USB
Direct thermal
CL-S521II/531II
Wired/Wireless LAN, USB
Direct thermal
CL-S400DT
Wired/Wireless LAN, USB, Bluetooth
Direct thermal
CL-E300/303
Wired LAN, USB
Direct thermal
Android OS
Printer
Windows Application
CITIZEN Android Label Print SDK
Wi-Fi / Bluetooth /
USB Host

Citizen CL-E321 Specifications

General

Print Technology	Thermal Transfer / Direct Thermal
Resolution	203 dpi
Power Supply	100-240V AC, 50/60 Hz
Max Print Width	4.1 inches (104 mm)
Media Sensor	Transmissive and reflective sensor
Interface	USB, Serial (RS-232)
Media Width	1.97 to 4.33 inches (50 to 110 mm)
Supported Barcode Types	Code 39, Code 128, ITF, Codabar, UPC-A, UPC-E, EAN-8, EAN-13, POSTNET
Supported Media Types	Continuous, Die-cut
Media Thickness	0.0635 – 0.254 mm (2.5 - 10 mil)
Print Speed	Up to 8 inches per second