Citizen CL-E321

CITIZEN Android Label Print SDK — Programming Manual
76
2.3.13 drawGS1DataBar method
Syntax
int drawGS1DataBar (String[] data, int type, int rotation, int exp, int x, int y)
Parameters
Parameter
[IN/OUT]
Description
Setting range
data
[IN]
String data
ASCII code character string.
symbology
[IN]
Barcode type
CLS_GS1_DATABAR_OMNI_DIRECTIONAL:
Omni-dirctional
CLS_GS1_DATABAR_COMPOSITE: Conposite
CLS_GS1_DATABAR_TRUNCATION: Truncation
CLS_GS1_DATABAR_STACKED: Stacked
CLS_GS1_DATABAR_STACKED_OMNI_DIRECTIONAL:
Stacked Omni-dirctional
CLS_GS1_DATABAR_LIMITED: Limited
CLS_GS1_DATABAR_EXPANDED: Expanded
rotation
[IN]
Direction of rotation
CLS_RT_NORMAL: No rotation
CLS_RT_RIGHT90: Rotate CW 90
CLS_RT_ROTATE180: Rotate CW 180
CLS_RT_LEFT90: Rotate CCW 90
exp
[IN]
Magnification
1-15
x
[IN]
X-coordinate
0000-9999
* The origin is at bottom-left.(0, 0)
y
[IN]
Y-coordinate
Description
Draws the GS1DataBar barcode with specifying options such as rotation, magnification and
coordinates.
* The available text types vary depending on the symbology. Refer to the "GS1 DataBar (RSS) in the
command reference.
Return value
Returns CLS_SUCCESS(0) on success, an error code otherwise. See "2.1 Return value" for the error
codes.
Example
// GS1 DataBar Omni-Directional
String[] omnidirectional = new String[] { "1234567890123" };
design.drawGS1DataBar(omnidirectional,
LabelConst.CLS_GS1_DATABAR_OMNI_DIRECTIONAL,
LabelConst.CLS_RT_NORMAL, 3, 10, 10);
// GS1 DataBar Composite
String[] composit = new String[] {
"1234567890123", "1234567890-07/07/07" };
design.drawGS1DataBar(composit,
LabelConst.CLS_GS1_DATABAR_COMPOSITE,
LabelConst.CLS_RT_NORMAL, 3, 10, 110);