Citizen CL-E321 Programming Manual

CITIZEN Android Label Print SDK — Programming Manual
77
// GS1 DataBar Truncation
String[] truncation = new String[] { "1234567890123" };
design.drawGS1DataBar(truncation,
LabelConst.CLS_GS1_DATABAR_TRUNCATION,
LabelConst.CLS_RT_NORMAL, 3, 10, 210);
// GS1 DataBar Stacked
String[] stacked = new String[] { "1234567890123" };
design.drawGS1DataBar(stacked,
LabelConst.CLS_GS1_DATABAR_STACKED,
LabelConst.CLS_RT_NORMAL, 3, 10, 310);
// GS1 DataBar Stacked-Omni-Directional
String[] stackedOD = new String[] { "1234567890123" };
design.drawGS1DataBar(stackedOD,
LabelConst.CLS_GS1_DATABAR_STACKED_OMNI_DIRECTIONAL,
LabelConst.CLS_RT_NORMAL, 3, 10, 410);
// GS1 DataBar Limited
String[] limited = new String[] { "1234567890123" };
design.drawGS1DataBar(limited,
LabelConst.CLS_GS1_DATABAR_LIMITED,
LabelConst.CLS_RT_NORMAL, 3, 10, 610);
// GS1 DataBar Expanded
String[] expanded = new String[] { "041234567890123" };
design.drawGS1DataBar(expanded,
LabelConst.CLS_GS1_DATABAR_EXPANDED,
LabelConst.CLS_RT_NORMAL, 3, 10, 710);

Citizen CL-E321 Specifications

General

Print Technology	Thermal Transfer / Direct Thermal
Resolution	203 dpi
Power Supply	100-240V AC, 50/60 Hz
Max Print Width	4.1 inches (104 mm)
Media Sensor	Transmissive and reflective sensor
Interface	USB, Serial (RS-232)
Media Width	1.97 to 4.33 inches (50 to 110 mm)
Supported Barcode Types	Code 39, Code 128, ITF, Codabar, UPC-A, UPC-E, EAN-8, EAN-13, POSTNET
Supported Media Types	Continuous, Die-cut
Media Thickness	0.0635 – 0.254 mm (2.5 - 10 mil)
Print Speed	Up to 8 inches per second