Citizen CL-E321 Programming Manual

CITIZEN Android Label Print SDK — Programming Manual
62
Example
// 203 dpi(default), inch(default)
design.drawTextLocalFont("drawTextLocalFont", Typeface.SERIF,
LabelConst.CLS_RT_NORMAL, 100, 100, 10,
(LabelConst.CLS_FNT_BOLD | LabelConst.CLS_FNT_ITALIC), 10, 0);
// 300 dpi, inch(default)
design.drawTextLocalFont("drawTextLocalFont", Typeface.SERIF,
LabelConst.CLS_RT_NORMAL, 100, 100, 10,
LabelConst.CLS_FNT_DEFAULT, 10, 50,
LabelConst.CLS_PRT_RES_300);
// 300 dpi, mm
design.drawTextLocalFont("drawTextLocalFont", Typeface.SERIF,
LabelConst.CLS_RT_NORMAL, 100, 100, 10,
LabelConst.CLS_FNT_DEFAULT, 10, 50,
LabelConst.CLS_PRT_RES_300, LabelConst.CLS_UNIT_MILLI);

Citizen CL-E321 Specifications

General

Print Technology	Thermal Transfer / Direct Thermal
Resolution	203 dpi
Power Supply	100-240V AC, 50/60 Hz
Max Print Width	4.1 inches (104 mm)
Media Sensor	Transmissive and reflective sensor
Interface	USB, Serial (RS-232)
Media Width	1.97 to 4.33 inches (50 to 110 mm)
Supported Barcode Types	Code 39, Code 128, ITF, Codabar, UPC-A, UPC-E, EAN-8, EAN-13, POSTNET
Supported Media Types	Continuous, Die-cut
Media Thickness	0.0635 – 0.254 mm (2.5 - 10 mil)
Print Speed	Up to 8 inches per second