- 15 -
Return to weighing mode
• press key F many times untill - PIECES appears on display
• press TARE key
Balance return to weighing mode and diode with g mark starts flashing
Attention:
1. If you choose batch quantity remember that precision of counting depends on
metrological parameters of balance and on repeatability of mass singular
counted elements.
2. Result of measurement is more precise if batch quantity is bigger
3. If summary mass of batch quantity is less than 5 reading divisions (5d) –
balance shows order about error -LO- and return to weighing automatically.
To Next Page
Loading...
Need help?
General
