Citizen CY series - 13 Weighing Loads under Scale

- 35 -
13. WEIGHING LOADS UNDER SCALE
In standard analitycal scales can weigh load on suspension.
To use this function:
• Remove plastic plug in basic of scale
• There is suspension in the basic of scale. It’s installed for good.
• Install hook to hang load (hook isn’t standard equipment for scale), weigh
load on hook.
Attention:
• Suspension cannot be turned around, move or manipulate. Mechanism of
scale can be damaged this way.
• Mass all additional elements as scale, string should be settled to zero by
pressing key TARE.