- 22 -
9.3. Average result of weighing
In various applications result of measurement is presented as average value of
several measurements especially if the conditions are not stable (vibrations,
twitches). In these cases if you use higher stage of the digital filter the measurement
is done with the established precision.
Press the TARE button, when horizontal lines appear on the display press the CAL
button.
• The balance shows first function in the menu. Press the F key repeatedly
until command AuE appears on the display.
• Press the PRINT button
• Pressing the F button set up new value of the function AuE with complying
following conditions:
AuE - 1 – average result I stage
AuE - 2 – average result II stage
AuE - 3 – average result III stage
• Confirm chosen value by pressing the PRINT button
To Next Page
Loading...
