Citizen SA-SD - Teaching Mode

5- 3
5-3 Teaching Mode
For reference

The two-point teaching and three-point teaching sort the work judgment values into descending
order, and set them accordingly to the HIGH and LOW setting values.
 For details of switching teaching methods, refer to "6-1-4 Teaching (TEACH)."
■
Basic
screen
T
eaching
Long press for 2 s
Master work measurement
Press key.
Measurement of LOW
defective work
Press key.
One-point teaching Two-point teaching Three-point teaching
On completion of teaching, digital display MAIN
(white) shows GOOD, and the HIGH and LOW
setting values are committed.
The display then returns automatically to the basic
screen.
First work measurement
Press key.
Second work measurement
Press key.
Measurement of HIGH
defective work
Press key.
Measurement of satisfactory
work
Press key.