Citizen SA-SD - Measurement Direction (DIRECT)

6- 13
6-1-9 Measurement Direction (DIRECT)
Parameter name Setting value Remarks
Measurement direction (DIRECT)
Selects between normal and reversed display of the
measurement value when the spindle of the sensor head is
pushed in during measurement.
NORMAL (Normal) / REVERS (Reverse) [Default: NORMAL]
Operation procedure
Note

When the measurement direction is changed, the following items must also be changed to
correspond:
 HIGH setting value
 LOW setting value
 Self trigger edge direction for hold setting
■
■
2秒長押し
/
選択 キャンセル
確定
HI.SET LO.SET HYSTER TEACH TOL <±>
ADVANC CALC COPY BANK
PR.VAL PR.OBJ PR.SAVE LEVER SPEED OUTPUT
MAINTECALIB RESET
Long press
for 2 s
Select
Commit
Cancel