6- 10
6-1-6 Preset (PR.VAL)
Parameter name Setting value Remarks
Preset value (PR.VAL)
Sets the reference value when the preset function is turned ON.
−199.9999 to 199.9999 (mm) [Default: 0.0000]
Preset is a function that adds the set value to a measured value. If a preset value is set, the current value
becomes the preset value when the controller executes the preset.
For example, when configuring the preset for a master work, set the preset value to 3.5 mm in order for its
position to be displayed as 3.5 mm.
Operation procedure
Related information
For details of how to operate the preset function, refer to "5-7 Preset."
Normal measurement or judgment value can be selected as the value to which the preset function
applies. For details of setting method, refer to the next section.
2秒長押し
/
選択 キャンセル
桁移動 数値変更
確定
CALIB RESET
HI.SET LO.SET TEACH TEACH TOL <±>
ADVANC CALC COPY BANK
PR.OBJ PR.SAVE DIRECT LEVER SPEED OUTPUT
MAINTE
Select
Commit
Cancel
Shift between
digits
Change numerical
values
To Next Page
Loading...