Citizen SA-SD - Preset Save (PR.SAVE)

6- 12
6-1-8 Preset Save (PR.SAVE)
Parameter name Setting value Remarks
Preset save (PR.SAVE)
If Preset save is set to ON, the preset and offset values are
written to an EEPROM so that they are retained after the power is
turned OFF.
ON / OFF [Default: OFF]
Operation procedure
Note

The memory (EEPROM) used for saving preset values can be overwritten up to approximately one
million times.
If there is no need to save preset values, set Preset save to OFF.
 If preset is performed using keys, the preset data is maintained after the power is turned off
because it is written into internal memory.
Related information

If the preset input is set to external input, the external input can be used to perform the preset.
 For details of preset input from external input, refer to "6-2-3 External Input."
■
■
■
2秒長押し
/
選択 キャンセル
確定
HI.SET LO.SET HYSTER TEACH TOL <±>
ADVANC CALC COPY BANK CALIB RESET
PR.VAL PR.OBJ DIRECT LEVER SPEED OUTPUT
MAINTE
Long press
for 2 s
Select
Commit
Cancel
■