Citizen SA-SD - Page 70

6- 40
6-2-8-1 Alarm Delay Time
Parameter name Setting value Remarks
Alarm delay time (DELAY)
Sets the delay time (changeable in 1 ms increments) from the
time the sensor head comes into upthrust position to the time the
alarm activates.
1 to 1,000 [Default: 1,000]
Can be set such that a momentary upthrust will not activate the alarm.
Operation procedure
6-2-8-2 Upthrust Check
Parameter name Setting value Remarks
Upthrust check
(PRS.CHK)
Sets the upthrust check ON/OFF.
ON / OFF [Default: ON]
Operation procedure
■
■
Long press
for 2 s
Select
Cancel
Commit
Change numerical
values
Shift between
digits
Long press
for 2 s
Select
Cancel
Commit