Clare Controls IP Network Camera User Guide 41
Overexposure prevention: Enable or disable the function in this field.
Exposure time: Value ranges from 1/3 to 1/100,000 s. Adjust it according to the
light condition.
Iris mode: Auto and Manual are selectable.
Auto iris Level: If you choose the auto iris mode, you can set the auto iris level.
Video standard: 50 Hz and 60 Hz are selectable. Choose according to the different
video standards; normally 50 Hz for the PAL standard and 60 Hz for the NTSC
standard.
Day/Night switch: Day, Night, Auto, Schedule, and Triggered by Alarm input are
selectable.
Sensitivity: If you choose the auto day/night switch, you can set the sensitivity of
the switch as high, normal, and low.
Mirror: The mirror function enables you to view another aspect of the image. You
can flip the image horizontally and vertically.
WDR: Wide dynamic range can be used when there is a high contrast of bright area
and dark area in a scene.
To Next Page
Loading...