Hal 104
The Clare Hal 104 Safety Electrical Tester is a powerful tool to assist in
the analysis of the safety of electrical and electronic equipment. A
range of tests are provided, with innovative features to aid difficult test
situations, which allow testing of a wide variety of equipment.
The Tester is designed to be easy to use, and also includes the
following innovative features: -
• Universal Supply Input
• Stores up to 6000 results including details of Products, user,
location, site, date and time in non-volatile flash memory.
• Highly accurate Ground Bond, Hipot leakage and DC IR
measurements.
• Comprehensive Powered Leakage test conforming with the
requirements of EN/IEC60990
• Accurate Power and Power Factor measurements
• Large Full graphics display, Real-time clock
• Connects to PC, Barcode reader and printer
• Software adjusts the user interface to differing levels of expertise
• Auto testcode generation
• Uses fully Barcode reading for simple & easy tests initiation
• Fast Start-up
• Fully isolated test outputs, to comply with EN50191.
• 4 wire Ground Bond test measurements
• Usable with the Clare No – Burn Ground Bond probe.
• Automation via the Seaward production line automation software
To Next Page
Loading...
