English
NX500/NZ500 21
English
Owner’s Manual
6. Enter the required information on the screens
displayed in the order shown below.
In order to proceed to the next sreen,
press the “Check” button.
7. Press the highlighted “Start Route” button.
8.
Route map will be displayed. The navigation
to your destination will start.
9.
To set up navigation menu, see “Navigation
set up “ in “Setup Operations” chapter.
Reset to Factory Defaults
1. Press Setup to enter setting menu mode.
2. Press the Misc button.
3. Press Restore Defaults button.
Select [YES] to restore your unit to factory
default settings. This function will erase all
memory from the unit and you must reset all
personalized items such as tuner presets.
NOTE: You will be asked once to confirm that
you would like to reset the unit. The unit will
power down and restart with factory defaults.
2
1
10
9
8
7
6
5
4
3
1 - Zoom Out
2 - Map Scale
3 - GPS Status
4 - Compass Position
5 - Current Time
6 - Back to Menu
7 - Local Information
8 - Mute
9 - Change View
10 - Zoom In
To Next Page
Loading...
Need help?
General
