Menus and Functions
38 P2398PM | 2018-12 Apex Tool Group GmbH
3
EN
3.9.5 Voltage
> >
Abb. 3-28: Submenu – Voltage
Symbol Description
Display of the undervoltage limit.
This limit can be set in the menu Setting the shut-off properties, Seite 28.
Display of the current battery voltage.
For high operational capability, this voltage is continuously monitored during the tight-
ening process. If the voltage drops below the undervoltage, a warning is issued on the
tool. Siehe “Setting the shut-off properties” auf Seite 28.
Display of the logic voltage of 5 V.
A voltage for components that are not needed for the core functions of the tool. The tol-
erance limits are
± 5%.
15.00 V
19.01 V
5 V
5.08 V
5 V
To Next Page
Loading...