Cleco CellCore - Counters Status; Tool Constant

Apex Tool Group GmbH P2398PM | 2018-12 39
Menus and Functions
3
EN
3.9.6 Counters status
> >
Abb. 3-29: Submenu – Number of tightenings
3.9.7 Tool constant
This menu is only available in the FastApps mode. In the mPro mode, the menu is hidden.
In Tool constant, the torque calibration value of the tool can be adjusted. This may be necessary if the
torque of the tool changes due to wear.
> >
Abb. 3-30: Menu – Tool constant
Symbol Description
Display of the number of all previous tightenings.
4
3
123
4
3
123
1923
4
3
123
4
3
123
16.60