Product Description
8 P2398PM | 2018-12 Apex Tool Group GmbH
2
EN
2.3 Navigation buttons
Use the navigation buttons to navigate to menu items and settings. Some buttons also have additional func-
tions.
2.4 USB connection
Connection for a Micro B USB cable to connect the tool to an external device interface.
This is used for the following requirements:
• Saving data and archives
• Installing software updates
• Parameterizing WLAN settings
Button Functions
• Press to move the selection box up.
• Press and hold to go directly to the run screen from all menu levels.
• Press to increase a value.
• Press and hold to increase a value quickly (jump by one).
• Press to move the selection box to the right.
• Press to increase a value.
• Press and hold to quickly increase a value (jump by ten).
• Press to move the selection box down.
• Press to decrease a value.
• Press and hold to quickly decrease a value (jump by one)
• Press to move the selection box to the left.
• Press and hold to go to the run screen in the main menu.
• Press and hold to jump up one menu level
• Press and hold to exit settings.
• Press to decrease a value.
• Press and hold to quickly decrease a value (jump by ten).
To Next Page
Loading...