Clevo Notebook - Page 17

Conserving power through
individual components: .......................................... 3-2
Conserving power throughout
the whole system:................................................... 3-2
Suspend and Resume............................................. 3-2
Setting the Power Management functions............ 3-4
Creating a partition on your hard drive .................................. 3-5
Battery Information................................................. 3-6
Chapter 4. Upgrading the Computer ....................4-1
Replacing the HDD .................................................. 4-2
Upgrading the Memory............................................ 4-4
A: Removing a memory module............................. 4-5
B: Installing a Memory Module ............................. 4-7
C: Setting the SW6 Jumper Switch ...................... 4-8
Upgrading the Processor ....................................... 4-10
Chapter 5. BIOS Utilities.......................................5 - 1
Power On Self Test (POST) ................................... 5 - 2
POST Message: Normal Operation ..................... 5 - 2
POST Message: Error Detected .......................... 5 - 3
System Configuration Utility ................................ 5 - 4
Information in the
System Configuration Utility (SCU) ................... 5 - 4
Initiating the System Configuration Utility ....... 5 - 5
Working with the Menu Bar................................ 5 - 6
System Configuration Utility Options ................ 5 - 8