Clevo Notebook - The PC Card Slot; Inserting PC Cards; Removing PC Cards

2 - 14
User’s Manual
2
The PC Card Slot
The computer is equipped with one PC card slot (previously referred to as
PCMCIA). The slot can support either one 3.3V/5V type II PC card or one 3.3V
CardBus card (PC Card 95). For information on what devices are supported by
the PC Card Slot, please refer to table 1-1 in Chapter 1.
Inserting PC Cards
Align the PC card with the slot and push the card in until it locks into place.
Removing PC Cards
To remove a PC card,
simply press the eject
button next to the
slot.
1. Eject button
2. PC card partially
inserted in slot
1
2
figure 2-12