Power Management
Configuring the Power Buttons 3 - 9
3
Adding Hibernate/Sleep to the Power Menu
Add Hibernate/Sleep to the Power Menu as follows.
1. Go to the Power Options (Hardware and Sound) control panel (see page 1 - 23).
2. Click āChange settings that are currently unavailableā .
3. Click Choose what the power buttons do.
4. Click to put a tick in the Hibernate/Sleep box under Shutdown settings.
5. Click Save Changes and close the control panel.
Figure 3 - 6
Power Options
Define Power
Buttons - Shutdown
Settings
To Next Page
Loading...
