NVIDIA Video Driver Controls
C - 14 NVIDIA® SLI Multi GPU Configuration
C
NVIDIA® SLI Multi GPU Configuration
This computer features an NVIDIA Scalable Link Interface (SLI) that improves
graphic quality and performance by combining dual NVIDIA GPUs (two video
cards are required) in a single system. To enable/disable SLI Configuration:
1. Go to NVIDIA Control Panel
(see page
C - 2
).
2. Click “+” next to 3D Settings if its sub-items are not shown and then click Set SLI
and PhysX configuration.
3. Click “
Maximize 3D Performance
” under “
SLI configuration:”
.
4. Click to select “
PhysX settings;
Auto-select (recommended) is the default setting.
5. Click
Apply
and
Restart Now
to restart the computer (see over).
Video Card
Options
Note that card types,
specifications and driv-
ers are subject to con-
tinual updates and
changes. Check with
your distributor/suppli-
er for the latest details
on video cards sup-
ported. Note that not
all video card options
for this computer mod-
el series support SLI
configuration (see
“Video Adapter” on
page D - 2).
Figure C - 11
Set SLI
Configuration
To Next Page
Loading...
