BIOS Utilities
5 - 4 The Setup Utility
5
The Setup Utility
The Aptio Setup Utility tells the system how to configure itself and manage basic
features and subsystems (e.g. port configuration).
Entering Setup
To enter Setup, turn on the computer and press F2 during the POST. The prompt
“Press F2 to Enter Setup” is usually present for a few seconds after you turn on the
system. If you get a “Keyboard Error”, (usually because you pressed F2 too quickly)
just press F2 again.
If the computer is already on, reboot using the Ctrl + Alt + Delete combination and
then hold down F2 when prompted. The Setup main menu will appear.
BIOS Settings
Warning
Incorrect settings can
cause your system to
malfunction. To correct
mistakes, return to Set-
up and restore the Pre-
vious Values with
<F2>, or Optimized De-
faults with <F3>.
To Next Page
Loading...
Need help?
General
