NVIDIA Video Driver Controls
C - 26 NVIDIA 3D Shutter Glasses Kit
C
Set Up Stereoscopic 3D
1. Make sure your 3D glasses are powered on, connected to the USB cable provided and
that the cable is plugged-in to one of the computer’s USB ports (check the documenta-
tion provided with the glasses kit for latest information on the glasses setup).
2. Go to the NVIDIA control panel.
3. Double-click Stereoscopic 3D (if the sub-menus are not visible), click Set up
stereoscopic 3D and then click Run Setup Wizard.
4. Follow the on-screen instructions to set up 3D Vision and click “Next” to progress
through the steps (this notebook has a built-in emitter).
NVIDIA Control
Panel
To access the Ge-
Force..... control panel
from the desktop; right-
click the desktop, then
click NVIDIA Control
Panel.
Figure C - 21
Set Up
Stereoscopic 3D
Enable stereoscopic 3D
Run Setup Wizard
To Next Page
Loading...
