Modules
7 - 14 PC Camera Module
7
Camera App
1. Make sure the camera is powered on (use the Fn + F10 key combination to toggle
power to the camera module).
2. Click the
Camera
app icon in the
Start screen to
run the
Camera
app .
3. The camera interface is a translucent app bar with three buttons (Model B
computers feature a Change camera button that enables the camera to be
switched between the 5.0M Pixels and1.0M HD dual cameras.
• Camera options:. Click this button to open a window with three main options:
Figure 7 - 7
Camera App Bar
Figure 7 - 8
Camera Options
Camera Options
• Resolution (determined by the
camera spec)
• Audio device (select micro-
phone to use)
• Video Stabilization (a toggle
based on spec of the camera)
To Next Page
Loading...
