Clevo P375SM - Page 165

Upgrading The Computer
Upgrading the Hard Disk Drive(s) 6 - 9
6
Removing the Hard Disk from the Upper HDD Bay Slot
1. Turn the computer off, remove the AC/DC adapter, turn it over and remove the bat-
tery.
2. Locate the hard disk bay cover and remove screw .
3. Slide the case cover until the case markers align.
4. Remove the hard disk bay cover .
5. Remove screws & from the hard disk assembly.

RAID Hard Disks
All hard disks in a RAID
should be identical (the
same size and brand) in
order to prevent unex-
pected system behavior.
Figure 6 - 5
HDD Bay Cover
Screw & Cover
Removal
1
2
3
4
5
6
1
2
4
3
5
6