Chapter 4: Configuration with web interface
98-148232-E To set up tracking and location reporting 73
• Network assigned: The APN is assigned from the network.
• User defined: APNs are provided from the Airtime Provider. Type in the APN next to
User defined name.
6. Under Interval reports, type in the Report interval in days (dd) and hours (hh).
Example: If you type in “01” and “12”, the EXPLORER 540 will send a report for every 1½
day.
7. Click Save.
You can see the status of the tracking link in the status area of the web interface. If the status
area is not shown, click
to see it.
If the EXPLORER 540 is in power save mode, no report is sent!
You can set up whether or not you want to allow the tracking server to control these
settings. See Remote control of tracking on page 87.
To Next Page
Loading...
