COBHAM SAILOR 100 GX Installation Manual

SNMP support
98-141779-G Chapter 6: Configuration 6-45
6666
Configuration
6.6 SNMP support
The SAILOR 100 GX supports SNMP v2 requests to retrieve configuration and present
settings. SNMP is always enabled on all Ethernet interfaces. The SNMP community string is
public.
The SAILOR 100 GX offers via SNMP most of the data that are available from the
DASHBOARD web pages. Detailed documentation about supported OIDs can be found in
the SAILOR 100 GX MIB file. This file can be downloaded from the web interface.
The MIB entries are grouped in the following sections:
• System configuration
• Navigation coordinates
• Antenna pointing
• Dashboard and profile
• Tracking receiver
To get the MIB file, do as follows:
1. Select HELPDESK.
2. Click the link Download MIB file.
3. Save the file on your computer.
Note
None of the SNMP values need to be polled more often than once a minute.
Polling SNMP values more frequently will impact the performance of the ACU.
Figure 6-32: Download of MIB file

COBHAM SAILOR 100 GX Specifications

General

Brand	COBHAM
Model	SAILOR 100 GX
Category	Marine Equipment
Language	English