Satellite profiles and modem profiles
8-14 Chapter 8: Service 98-141779-G
3. Select a modem profile. The page automatically displays the parameters available for
the selected modem profile. For instructions how to add a modem profile see Modem
profile – New entry and Edit on page 8-14.
4. Enter the data for the satellite, if any. For satellite data see www.lyngsat.com.
5. Only for satellite profiles that use a modem profile with the Generic modem:
At Elevation cut-off enter the minimum elevation angle for the antenna.
• FCC (FCC §25.205): 5 degrees
6. Click Apply to save the settings for the satellite profile.
8.3.2 Modem profiles
A VSAT modem profile contains all VSAT modem settings that are necessary for a
successful connection to the satellite. The data you have to fill in are provided by your
VSAT service and modem provider.
On the page Modem profiles you create, edit or delete modem profiles. You must add at
least one modem profile.
8.3.2.1 Modem profile – New entry and Edit
To add or edit a VSAT modem profile, do as follows:
1. Go to SETTINGS > Modem profiles and click New entry or Edit. The supported
modems are listed in the drop-down list Modem.
Figure 8-13: Web interface: SETTINGS, Modem profiles (example)
To Next Page
Loading...
Need help?
General
