COBHAM SAILOR 100 GX Installation Manual

To get support
98-141779-G Chapter 8: Service 8-7
8888
Service
To reset to factory default settings, do as follows:
1. Click the menu item ADMINISTRATION > Factory default.
2. Click Reset to factory default.
3. Click Clear event history to clear all registered events.
8.1.3 Reset to factory default - GMU
Figure 8-4: Web interface: ADMINISTRATION > Factory default, ADU and ACU
Note
Calibration data for azimuth and cable calibration are not reset during factory
default.
CAUTION! The system becomes inoperable if you select Default Factory
Configuration in the drop down list on the page SERVICE > Modem.

COBHAM SAILOR 100 GX Specifications

General

Brand	COBHAM
Model	SAILOR 100 GX
Category	Marine Equipment
Language	English