To get support
98-141779-G Chapter 8: Service 8-5
8888
To make a self test, do as follows:
1. Click the menu item SERVICE.
2. Click the menu item
Self test.
3. Select Enable under Extended antenna POST for the longer self test, click Apply.
4. Click Restart antenna to restart the ADU and/or Restart terminal to restart the
ADU and ACU.
If you want to reset the modem to factory defaults see Reset to factory default - GMU on
page 8-7.
8.1.1.5 Proxy server settings in your browser
If you are connecting your computer using a LAN or WLAN interface, the Proxy server
settings in your browser must be disabled before accessing the web interface. Most
browsers support disabling of the Proxy server settings for one specific IP address, so you
can disable Proxy server settings for the web interface only, if you wish. Consult your
browser help for information.
To disable the use of a Proxy server completely, do as follows:
1. In Microsoft Internet Explorer, select Tools > Internet Options > Connections >
LAN Settings.
Warning! The SAILOR 100 GX will reboot to perform the self test.
Rebooting the ACU will terminate all existing connections.
Figure 8-3: Web interface: SERVICE, Self test
The following description is for Microsoft Internet Explorer. If you are using a
different browser, the procedure may be different.
To Next Page
Loading...
Need help?
General
