Advanced features
6-10 HF SSB transceiver user guide
Before you can send a Radphone selcall, you need to:
• set up your address provided by Telstra in a selcall group
with
CODAN
as the selcall type (refer to the HF SSB
transceiver reference manual, Chapter 8, Selcall address
setup)
• assign this selcall group to the channels you use for
Radphone selcalls (refer to the HF SSB transceiver
reference manual, Chapter 3, Channel and scan table
setup).
To send a Radphone selcall, follow the procedure in
Chapter 4, Selcall, or the procedure in the Telstra publication
Radphone User Guide. Refer to the Telstra publication to
obtain the correct selcall address to call and other user
information.
If the call is successful the Telstra station will automatically
respond with a revertive signal. The station operator will then
send you a voice call.
If your Radphone selcall is unsuccessful, the channel
frequency may be inappropriate for the time of day and range
you are working. Try calling again using another called
address or channel frequency.
Receiving a Telstra telcall or selcall
The following explains how you can receive a telephone call
on your transceiver via Telstra and the public telephone
service.
Telephone subscribers can book a radio-telephone call to you
by dialling the national Telstra booking number 0108.
Advanced features
6-10 HF SSB transceiver user guide
Before you can send a Radphone selcall, you need to:
• set up your address provided by Telstra in a selcall group
with
CODAN
as the selcall type (refer to the HF SSB
transceiver reference manual, Chapter 8, Selcall address
setup)
• assign this selcall group to the channels you use for
Radphone selcalls (refer to the HF SSB transceiver
reference manual, Chapter 3, Channel and scan table
setup).
To send a Radphone selcall, follow the procedure in
Chapter 4, Selcall, or the procedure in the Telstra publication
Radphone User Guide. Refer to the Telstra publication to
obtain the correct selcall address to call and other user
information.
If the call is successful the Telstra station will automatically
respond with a revertive signal. The station operator will then
send you a voice call.
If your Radphone selcall is unsuccessful, the channel
frequency may be inappropriate for the time of day and range
you are working. Try calling again using another called
address or channel frequency.
Receiving a Telstra telcall or selcall
The following explains how you can receive a telephone call
on your transceiver via Telstra and the public telephone
service.
Telephone subscribers can book a radio-telephone call to you
by dialling the national Telstra booking number 0108.
To Next Page
Loading...
Need help?
General
