Codan HF SSB series User Manual

Using the transceiver
3-10 HF SSB transceiver user guide
Selecting a channel by recalling its channel frequency
If the feature for recalling channels by frequency is switched
on (refer to the HF SSB transceiver reference manual,
Chapter 7, Recall channels by frequency on/off), you can
select a channel by recalling its frequency instead of its
channel number.
To select a channel by recalling its channel frequency:
Action Notes
1.
In Channel mode, press
Enter
R'call
The transceiver always starts up
in Channel mode. Example of
the display:
USB
HI
PROG
Rx.
158
4010
ENTER
Recall Chan:
2.
Enter the kHz
frequency to one
decimal place
numeral
button
Enter a 5-digit or 6-digit
number. For example, to select
the channel on 2040kHz, enter
the number 20400.
158
EXIT
Rx.
USB
HI
Recall Freq:
ENTER
–2,040.0
4010
When you enter the fifth digit,
the display changes from
Recall Chan
to
Recall Freq
.
Using the transceiver
3-10 HF SSB transceiver user guide
Selecting a channel by recalling its channel frequency
If the feature for recalling channels by frequency is switched
on (refer to the HF SSB transceiver reference manual,
Chapter 7, Recall channels by frequency on/off), you can
select a channel by recalling its frequency instead of its
channel number.
To select a channel by recalling its channel frequency:
Action Notes
1.
In Channel mode, press
Enter
R'call
The transceiver always starts up
in Channel mode. Example of
the display:
USB
HI
PROG
Rx.
158
4010
ENTER
Recall Chan:
2.
Enter the kHz
frequency to one
decimal place
numeral
button
Enter a 5-digit or 6-digit
number. For example, to select
the channel on 2040kHz, enter
the number 20400.
158
EXIT
Rx.
USB
HI
Recall Freq:
ENTER
–2,040.0
4010
When you enter the fifth digit,
the display changes from
Recall Chan
to
Recall Freq
.

Codan HF SSB series Specifications

General

Brand	Codan
Model	HF SSB series
Category	Transceiver
Language	English