Codan HF SSB series User Manual

Sending calls
HF SSB transceiver user guide 4-13
To send a GPS beacon call:
Action Notes
1.
In Channel mode, select
one of the frequencies
scanned by the other
station.
2.
Wait until the channel
is clear of all voice and
data traffic.
Temporarily switch off any
muting so that you can hear
activity on the channel.
3.
Press
F1
The display shows the last type
of call made:
208
5820
CALL
Rx.
USB
HI
Selcall:
TYPE
185074
The top right position of the
display shows the address of
the last station called.
4.
Repeatedly press
F2
until you see
GPS
beacon
displayed on
the top line.
Example of the display:
208
5820
CALL
Rx.
USB
HI
GPS beacon:
TYPE
185074
Sending calls
HF SSB transceiver user guide 4-13
To send a GPS beacon call:
Action Notes
1.
In Channel mode, select
one of the frequencies
scanned by the other
station.
2.
Wait until the channel
is clear of all voice and
data traffic.
Temporarily switch off any
muting so that you can hear
activity on the channel.
3.
Press
F1
The display shows the last type
of call made:
208
5820
CALL
Rx.
USB
HI
Selcall:
TYPE
185074
The top right position of the
display shows the address of
the last station called.
4.
Repeatedly press
F2
until you see
GPS
beacon
displayed on
the top line.
Example of the display:
208
5820
CALL
Rx.
USB
HI
GPS beacon:
TYPE
185074

Codan HF SSB series Specifications

General

Brand	Codan
Model	HF SSB series
Category	Transceiver
Language	English