Codan HF SSB series - Page 88

Sending calls
HF SSB transceiver user guide 4-15
Action Notes
7.
Was the call
successful?
Yes  Step 8.
No  Step 1.
If
No response
was displayed,
try sending the call again. If the
call repeatedly fails, try another
channel.
If
No remote GPS
was
displayed, the call failed
because the other station has no
GPS receiver connected or no
GPS information.
8.
To restart scanning,
press
Scan
Now that you have finished the
call, you want the transceiver to
be ready to detect the next call
sent to you.
The GPS information is stored
in call memory. To view it, see
Chapter 5, Reviewing calls
held in memory.

Sending calls
HF SSB transceiver user guide 4-15
Action Notes
7.
Was the call
successful?
Yes  Step 8.
No  Step 1.
If
No response
was displayed,
try sending the call again. If the
call repeatedly fails, try another
channel.
If
No remote GPS
was
displayed, the call failed
because the other station has no
GPS receiver connected or no
GPS information.
8.
To restart scanning,
press
Scan
Now that you have finished the
call, you want the transceiver to
be ready to detect the next call
sent to you.
The GPS information is stored
in call memory. To view it, see
Chapter 5, Reviewing calls
held in memory.
