l If a DataMan 260 is transmitting its own read result, it will buffer any data received from another reader until it has
finished its own data transmission. If a DataMan 260 is transmitting another reader’s data, it will buffer its own
data if it receives a trigger signal while it is processing the other reader’s data.
l If you use a single power supply for multiple readers, make sure that the power supply can provide enough
power for all of the readers.
46
Setting Up Your DataMan 260
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
