Colop e-mark - Initial Operation and Setup of the e-mark

e-mark marking device Chapter 4 Initial operation
CODI Standard 1.0 Page 21 of 61
Operating and Maintenance Manual
3.5 Operating systems
The COLOP e-mark App is available for mobile devices using Android and iOS, as well as for Windows
PCs, and is compatible from the following versions:
- Android 5.0
- iOS 11
- Windows 7
There may be issues with previous versions and certain functions may be limited.
4 INITIAL OPERATION
This chapter explains using the e-mark for the first time and includes unpacking, visual inspection,
assembly, switching on and performance testing the e-mark.
4.1 Transport and unpacking
When transporting the product, please note the following points:
NOTICE
Battery contacts are protected against short-circuits with insulating plastic tape.
The plastic tape must be removed before using for the first time (see chapter
4.2).
NOTICE
The ink cartridge is packaged separately. It must be inserted before using for
the first time (see chapter 4.2).
Unpacking
Carefully remove the e-mark from the packaging. Keep the original packaging for storing or transporting
the e-mark. Dispose of other packaging materials appropriately. Never let children play with the packaging
or with parts of it, since there is a risk of asphyxiation from small parts or plastic film.
WARNING!
Danger of suffocation from plastic film. Risk of suffocation from small
parts for children below the age of three.
The packaging is not a toy. Dispose of packaging materials immediately and in
an environmentally appropriate manner.