ComAp IM-NT - Page 197

InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
197
Range [units]
DISABLED, ENABLED [-]
Related FW
3.0
Force value
possible
YES
Description
This setpoint is used to enable sending SMS and/or e-mail alerts when a
"protection" configured as History record occurs. See the chapter Alarm
management for more information about protection types.
NOTE:
As the History record protection does not appear in the alarmlist, the SMS or
e-mail may contain empty alarmlist.
12.2.14.2 Setpoint: Alarm only
Group
Act. calls/SMS
Range [units]
DISABLED, ENABLED [-]
Related FW
3.0
Force value
possible
YES
Description
This setpoint is used to enable sending SMS and/or e-mail alerts when a
"protection" configured as Alarm only occurs. See the chapter Alarm
management for more information about protection types.
12.2.14.3 Setpoint: Warning
Group
Act. calls/SMS
Range [units]
DISABLED, ENABLED [-]
Related FW
3.0
Force value
possible
YES
Description
This setpoint is used to enable sending SMS and/or e-mail alerts when a
warning-type protection occurs. See the chapter Alarm management for more
information about protection types.