ComAp IM-NT - Connection to Multiple Controllers

InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
32
4.1.5 Connection to multiple controllers
Connection to multiple controller is available in InteliMonitor. It is possible to connect to multiple
controller using Direct connection to I-LB+, using Internet connection to NTC BaseBox controllers or to
InternetBridge, using modem connection capable of multiple connections or AirGate connection to
multiple NTC BaseBox controllers or to IntenetBridge.
Direct multiple connection
Internet multiple connection (use Internet Bridges IPs for connection to NTC BaseBox
controllers as well
Airgate multiple connection (fill in AirGate IDs for each controller, when using InternetBridge
fill in InternetBridge AirGate ID for each controller)