InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
Differential frequency between the busR and the busL.
13.1.2.12 Value: Angle
The angle between the phasors of the busR and busL voltage.
13.1.2.13 Value: BusR V [kV]
This value shows measured busR voltage in kV.
13.1.3 Group: Gen-sets values
13.1.3.1 Value: Gen-set1 pwr
This value shows the actual power of corresponding genset (i.e. power of
genset with CAN address 1 is shown in Gen-set1 pwr). If genset with
corresponding address is not available (does not exist of function on the CAN
bus) value "#####" is diplayed.
13.1.3.2 Value: Gen-set2 pwr
To Next Page
Loading...
Need help?
General
