ComAp IM-NT - Page 246

InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
246
13.1.13.2 Value: Sum MVAhr
Group
Statistics
Units
-
Related FW
3.0
Description
In BTB - this value shows always 0.
This value shows the total sum of MVAhr counted from all the genset in the
according control group. If two separate control groups are connected by
group link this value shows sum of MVAhr from both connected control
groups.
NOTE:
The counter can be readjusted/reset from InteliMonitor menu Monitor -> Set
statistics.
13.1.13.3 Value: BL kWh
Group
Statistics
Units
kWh
Related FW
3.0
Description
This value shows the sum of kWh transferred from the busL to busR.
NOTE:
The counter can be readjusted/reset from InteliMonitor menu Monitor -> Set
statistics.
13.1.13.4 Value: BusL kVAhr
Group
Statistics
Units
-
Related FW
3.0
Description
This value shows the sum of kVAhr transferred from the busL to busR.
NOTE:
The counter can be readjusted/reset from InteliMonitor menu Monitor -> Set
statistics.