ComAp IM-NT - Page 321

InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
321
how to control the output from InteliMonitor and the Modbus chapter in the
latest communication guide for information about control the output using
Modbus.
15.2.1.89 Binary output: RemoteControl8
Related FW
3.0
Description
This is a general purpose output, which can be closed and opened remotely,
e.g. from InteliMonitor using the "Remote switches" tool or via MODBUS
using the register #46361 and command #26.
NOTE:
See the Remote switches chapter in the InteliMonitor help for details about
how to control the output from InteliMonitor and the Modbus chapter in the
latest communication guide for information about control the output using
Modbus.