EasyManuals Logo

ComAp InteliMains 210 BTB User Manual

ComAp InteliMains 210 BTB
576 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #140 background imageLoading...
Page #140 background image
InteliMains 210 Global Guide
140
Web Server
IMPORTANT: The web interface is based on HTTP protocol and is intended to be used only in
private networks. It is not recommended to expose the web interface to the public Internet.
The Web Server is designed for basic monitoring and adjustment of the controller using a web browser. Just put
the controller IP address into the browser to display the main controller web page like http://192.168.1.254. You
will be asked for the controller access code prior to entering the web pages.
IMPORTANT: Do not use the browser navigation buttons as "Back", "Forward" or "Reload". Use
the links and the reload button located in the toolbar instead.
Note: Only two remote clients can be connected to the Web Server at one moment. If you close your web
browser without disconnecting from the CM-Ethernet ("Exit" button at the web pages), the connection will be
blocked for next 5 minutes.
Image 6.7 Web Server main screen

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ComAp InteliMains 210 BTB and is the answer not in the manual?

ComAp InteliMains 210 BTB Specifications

General IconGeneral
BrandComAp
ModelInteliMains 210 BTB
CategoryController
LanguageEnglish

Related product manuals